Mobile CB Antenna Mounts

Brackets for fitting a CB aerial to a truck cab, a hatch or a boot, plus spare mount bases for Sirio and GGD aerials. Truck brackets are electropolished stainless steel in 2.5mm, 3mm and 4mm, each made for a named cab: Scania, MAN, DAF X, Mercedes Actros 2016, Volvo FH first and new series, and Iveco Stralis, Stralino and Eurocargo.

  • Each cab bracket suits one fixing point: a sun visor upright, above the door on rivets, or the door's vertical upright, driver or passenger side.
  • The universal bracket has holes for adjustment and suits any truck.
  • The tiltable steel bracket fits a hatch or boot and takes one of three optional SO-239 cables.
  • Spare bases for the Sirio Performer P5000, P600 and P800 and the GGD Turbo 2002.

Not sure which mount suits your vehicle? Our guide explains how the mount and the ground plane decide your range.

Showing all 15 results

Which CB aerial mount fits your vehicle, and what has to match?

A mount settles two things: where the aerial sits and how well it earths. A mobile CB aerial works against the bodywork as its ground plane, so the fixing face needs clean metal to metal contact.

On a truck the brackets are cut for named cabs and one fixing point, which sets the aerial high and clear of the bodywork. Each carries a position letter: (P) at a sun visor upright or anchorage, (V) at the two screws of a door's vertical upright, (O) above the driver's door by rivets. All are electropolished stainless steel, and the Actros 2016, Stralis new Series and DAF X brackets are laser cut from high strength steel.

CabFixing pointPositionSteel
Volvo FH 1st SeriesSecond visor upright, passengerP3mm
Volvo FH new SeriesFirst visor upright, passengerP3mm
Mercedes-Benz Actros 2016First visor anchorage, passengerP4mm
IVECO EurocargoFirst visor anchorage, driverP3mm
IVECO Stralis new SeriesDoor upright, two screws, passengerV3mm
IVECO Stralis, Stralino, EurocargoDoor upright, two screws, passengerV2.5mm
MANAbove door by rivets, driverO2.5mm
DAF XDoor upright, two screws, two rivetsV2.5mm
ScaniaVisor upright, passengerP2.5mm

For a car, the Hi Way tiltable steel bracket fits a tailgate or boot lid lip and folds the aerial down for a low garage, a barrier or a car wash, then back upright without removing it. It takes one of the optional SO-239 cables, not included. Where no cab shaped bracket is listed, the Sirio universal bracket has holes for adjustment to match the fixing points on your cab, mirror arm or bar.

If the whip is sound and only the base has failed, order the matching spare. The P5000-PL mount is the Sirio spare for the Performer P5000 and P5000-PL, the P600-P800 PL mount covers the Performer 600 and 800, and this spare mount base suits the Sirio P 5000 and GGD Turbo 2002. Bases do not interchange between aerial families.

The check most often missed: the bracket has to earth through sound, clean metal. Bolted to plastic trim it leaves the aerial with no ground plane, and on a boot lip the edge has to be bare metal where the clamp grips. Reset the SWR with a meter whenever the mount moves.