The Moonraker Titan is a 10 metre multi-mode mobile transceiver covering AM, FM, USB, LSB, CW and PA. Output power is fully adjustable via a variable control up to 40W, so it can also be run at low power to drive an external amplifier, and the large heatsink on the back keeps the radio cool during long QSOs. It suits 10 metre operators who want a mobile set with receive filtering and scanning built in.
| Specification | Value |
|---|---|
| Frequency range | 28.000 to 29.700 MHz |
| Mode | AM/FM/USB/LSB/CW/PA |
| Output power | Adjustable, Low ~200mW to High ~40W |
| Step | 10Hz, 100Hz, 1KHz, 10KHz, 100KHz |
| ASQ | On/off |
| Echo | On/off |
| Hi-cut filter | On/off |
| Beep | On/off |
| Dual watch | Yes |
| Noise blanker | On/off |
| ANL | Built-in |
| Scan function | Yes |
| Roger beep | Yes |
| LCR (last channel recall) | Yes |
| Mic gain | Adjustable |
| TalkBack | Yes |
| Scan list | Yes |
| TOT | Yes |
| Digital RFG | Adjustable |
| A-RFG (auto RFG) | Yes |
This radio covers the whole of the 10 metre band and can easily be put into export mode for different markets, which expands its frequency coverage. The Hi-Cut filter and noise blanker are well equipped to cut down band noise and enhance reception, making contacts easier, while the scan function and Dual Watch function are useful for finding activity on the band or monitoring a pair of favourite most-used frequencies.
The hand mic included features easy to access channel change buttons, a must when using in a vehicle, or if the radio is mounted up out the way. A 3.5mm mono jack on the back of the radio allows a morse key to be plugged in for CW mode, and a secondary 3.5mm jack allows for an external speaker to be connected.
Please note: new stock, improved version with the latest firmware installed.
Comes complete with:
- Mounting hardware
- Fused power lead
- Full instruction manual
- Hand microphone
Reviews
There are no reviews yet.