The PNI HP8000L is a traditional looking CB transceiver covering the UK40 and EU CB frequencies across 80 AM/FM channels. Despite the classic styling it carries features usually found on more expensive rigs, including RF gain and squelch controls and a quick access channel 9/19 knob. It suits drivers who want a straightforward in-cab set that connects directly to a vehicle supply.
| Specification | Value |
|---|---|
| Frequency range | 25.615 to 28.305 MHz |
| Channels | 80 AM/FM |
| Frequency control | P.L.L. |
| Operating temperature | -10° to +55°C |
| DC input voltage | 13.8Vdc ±15% |
| Size | 38mm (h) x 115mm (W) x 150mm (D) |
| Weight | 0.8 kg |
| Transmitter system | CPU controlled P.L.L. synthesizer |
| Maximum RF power | 4W at 13.8Vdc |
| Modulation | 85% to 90% (AM); 1.8 KHz ±0.2 KHz (FM) |
| Antenna impedance | 50 ohm unbalanced |
| Transmitter current drain | 1000mA (at no modulation) |
| Receiver system | CPU controlled Double conversion super |
| IF | 1st 10.7 MHz; 2nd 450 KHz |
| Sensitivity | -120dBm for 12dB SINAD (FM); -107dBm for 12dB SINAD (AM) |
| Audio output at 10% THD | 2.5W at 8 ohm |
| Audio distortion | <8% at 1 KHz |
| Image rejection | 65dB |
| Adjacent channel | 85dB |
| Signal noise ratio | 45dB |
| Receiver current drain | 220mA (stand-by) |
Supplied with the radio:
- DC lead with fitted cigarette plug, for connecting straight to the car or van
- Command microphone with Up and Down channel selection buttons
- Mounting trunion bracket with thumb screws
- Microphone hanging bracket
Reviews
There are no reviews yet.